Features of Part Number 102302:
1. > Good reliability, longer service life.
2. > Stainless steel material.
3. > Accurate dimensions
4. > Sturdy construction.
5. > Applicability to a wide variety of mechanical and
industrial control.
Product Specification:
| Part Number: | 102302 |
| Description: | Shaft |
| Application for: | PROCUT 5001 / 7501 |
| Suitable for Cutter Machine: | Bullmer |
| Package: | 1pcs / pp bag, Shipping by foam cotton and Carton for protection. |
| Delivery Time: | In stock, we can send out within 24 hours after payment |
| MOQ: | As an initial, less quantity is avaliable and trial order will be
highly appreciated! |
| Payment Term: | T/T, Western Union, Paypal, LC at sight, etc |
| Quality guarantee: | Usually is 6 Months, and if there's any quality problem, we will be
replace to customer immediately. |
Yimingda can supply different spare parts and consumables (knife
blade, sharpening stone, bristle block) used for different industry
machines. Below are some of machine model parts we can supply:
1.> GT7250, S7200, GT5250, S5200, GT3250, S3200, XLC7000, GTXL,
Paragon VX, Spreader SY105, XLS, Plotter.
2.> MP6, IX6, IX9, MP9, MH8, Q80, M88, Q25, Q50, VT2500, VT5000,
VT7000.
3.> HY-H series Cutters, Spreaders for Yin.
4.> And for Bullmer, Investronica, Kuris, FK, OROX, IMA, etc.
Product's Picture :
More auto cutter parts for Bullmer:
| Part No. | Description |
| 84602001 | knife walking guide wheel shafts |
| 066758/70130837 | EtherCat couplers EK1100 |
| 6567 | Pneumatic sound absorber U-1/8 |
| 54782 | Pneumatic plug screw QS-1/8-6 |
| 52525 | Throttle back valve GRLA-M5-B |
| 60448 | Air service unit FRC-3/8-D-Midi |
| 61262 | Pressure gauge MA-50-16-1/4-EN |
| 50190 | Double nipple ESK-1/4-1/4 |
| 54795 | Pneumatic plug screw QSF-1/8-6 |
| 70103139/060726 | Elastic coupling D1=18H7/D2=22F7 |
| 70128102/105941 | TB751820-33-004 Sharpen motor mounting plate |
| 70135018/107353 | TB751820-38-030 Drive wheel |
| 102308 | Turn Plate Catch |
| 63113 | PN-End switch SME-8M-DS-24V-K2,5-OE |
| 54811 | Pneumatic L-plug screw QSML-M5-6 |
| 53414 | Grooved ball bearing 6002-ZR |
| 60570 | Ball bearing 10x22x6 |
| 58085 | Slinder Screw DIN 912 M4X8 12.9 |
| Sharpening Motor Holder | Sharpening Motor Holder -Bullmer |
| 102311 | Presser foot part |
| 84635010 | Internal Belt(RPF3230 13X560Li) |
| DSNU 32-115-P-A | Piston hydraulic for Bullmer |
| 102649 | Roll holder lower left |
| 112267 | Gear Flag |
| 60458 | Steel Ball RB-5 RS |
| 63067 | Special Oil |
| 102646 | Carrier Plate |
| 102650 | Roll holder lower right |
| 102651 | Roll holder upper left |
| 102652 | Roll holder upper right |
| 54854 | Cylinder screw DIN 912 M4x14 8.8 |
| 52409 | Screw M3*10 |
| 108201 | Gear flag 2 from 09/02 |
| 105821 | Grind Stone for 8001/8002/8003/E80 |
| 105935 | Cutting Blade for Bullmer Cutter, size: 223 * 8 *2.5mm |
| 109148 | Cutting Blade for Bullmer Cutter, size: 95 * 2 * 6mm |
| 104450 | Cutting Blade for Bullmer cutter, size: 223 * 2.5 *10/8mm |
| 105934 | Cutting Blade for Bullmer Cutter, size: 169 * 6 * 2mm |
| 223x9x3mm | Cutting Blade for Bullmer Cutter, size: 223 * 9 * 3mm |
| 01411/105935/70119001 | Cutting Blade for Bullmer Cutter, size: 223 * 8 * 2.5mm |
For more information about auto cutter products, please do not
hesitate send Email to us, we'll reply you very soon. Any of your
inquiry will be highly appreciated. Thank you!
